Squire Stratocaster – Service and setup

There comes a point when even the best of guitars need a service and setup.  Most people will have their car serviced regularly, why not your guitar? While the strings are off I always give the fretboard a good clean. The heads were a little stiff so a little light oil. and a bit of […]

Telecaster – Bone nut and setup

What a fantastic looking guitar.  Got to love a Tele’, but a Tele with a Bigsby, even better! That black and white finish look just great. There’s some problems with the bridge though.  It’s sitting rather low, I’m not sure if it’s able to rock backwards and forwards properly?  The trouble is, if I raise it […]

Squire Start’ – Custom Pickups

Here’s a great way to improve our guitar.  Rather than trade it in for an upgrade how about changing the pickups?  These should sound good. About the only bits that I’m going to keep are the volume pot and the pickup switch. That’s the new wiring.  I’ve added push/push pots on each of the tone […]

Squire Mustang – Setup

Here’s something a little different, rather than the usual round of Stratocasters etc.  An odd scale length for Fender as well, just a little shorter than the usual.  However it just wasn’t playing properly. While the string were off I also gave the fretboard a good clean…. and oil…. The scale length means none of […]

Squire Stratocaster – Upgrade

I know this is a budget guitar but it should have been better than this.  However a little bit of work and I’ll get it playing nicely…. The first thing I did was to remove the nut.  It’s a good job I was planning to replace it as the old one came out in bits….. I’m […]

Classic Vibe Stratocaster – Setup

What a lovely Strat’, I never really used to like this colour, but it’s growing on me.  There’s nothing much wrong with it mind you, just needs a bit of a setup. The first problem however was getting the old strings off…  Why the plate on the back was on the wrong I’ve no idea?  […]

#Telecaster – Setup and service

A little unusual this one, not the standard Tele’.  It had  few minor problems, nothing too difficult… The first one was a couple of stripped out screws.  It’s easy to do, in this case it’s the screws from the control plate.  I drilled out the old hole and glued in a couple of wooden plugs… Once […]

Squire Precision Bass – Setup

A nice bass just in need of a little tweek here and there. The basic principles are the same, just a few subtle differences.  Sadly the frets are a little uneven so I’m not going to get a really sweet action without a little buzz.The neck had rather too much set so I’ve flattened it […]

Squire Stratocaster – Setup

A nice new guitar.  They can be good guitars but, sadly, they don’t seem to have the time to set them up properly in the factory.  They just need a little work to make the most of them. While I’m at it the owner wants all the protective plastic removing, not actually as easy as you […]