This really is a beautiful guitar. It’s been through my workshop before but it’s not behaving as well as you would like with a guitar at this level. It doesn’t seem to want to hold it’s tuning very well. I think it’s the usual problem but the owner assures me that he never uses the […]
So here’s a thing, this is a left handed guitar but the owner wants it strung as per a right handed guitar, but he doesn’t want a right handed guitar as he plays it left handed. A little odd, but relatively simple… First of all then, out with the old nut. Since neck had it’s […]
I like these, great value, really well made although there are some slight problems. Much as I love a Bigsby they do have one or 2 weak points. The first one is not staying in tune, or more correctly not returning to tune once you use the trem. Part of the problem is the bridge […]
I rather like these, I’m always a sucker for a semi-acoustic. This one’s brand new but sadly isn’t playing very well. the pickups still even have the plastic film on them. The biggest problem is in the frets, some of them a very uneven.. So out with the nut… and level the neck. Tape it […]
A nice one this. just needing a little work to get it playing nicely. Before anything else I like to start with a good clean. A spot of Lemon Oil to keep the wood in good condition. So a full setup, starting with the neck relief… with a small twist on the truss-rod. Next the action […]
Does your guitar buzz playing open chords? at the top of the neck? It’s probably because the slots in the nut are too low. The proper answer is to replace the nut but a quick fix can be achieved…. It’s got a nice bone nut, but the action is way too low. As I say, […]
What a beauty, I’m not sure if It’s a little extreme, but it’s got something. It’s not staying in tune very well mind you, but I think I an see why. Here’s why it’s not staying in tune: With the strings pulling out of the slots in the nut at such an angle, they’ll be […]
Some of these “Vintage” guitars can be quite good. For some reason the nut slots on this one have been cut rather deep and the open strings are buzzing a little. There are quick fixes but the proper thing to do is to replace the nut. Gently out with the old one. The new bone […]
Here’s a very attractive guitar, lovely piece of wood. Had a couple of requests with this one, both easy to sort but one a little more unusual. The owner would prefer just one set of volume and tone controls, rather than a set for each pickup? It’s got standard wiring so it’s an easy enough job, just re-arranging […]
So if you saw my last video, what’s in a setup, and feel you want to have a go here are the tools you’re going to need… Alternatively, give me a call…