Ovation – Electric Pickup

These are nice.  The owner wanted an electric pickup fitted. The usual place for the jack socket is to combine it with the strap button.  Unfortunately I don’t think if I extend the hole it’ll be strong enough. So I’m going to use a standard jack socket mounted elsewhere. The pickup is actually a little […]

Fender Acoustic – Setup with lower action

There’s nothing worse than trying to learn the guitar on one that’s really hard to play!  The action on this one was very high which is only ever going to give you sore fingers! Measuring up at the 12th fret the action’s way too high… The frets are a little uneven so I’ll never be […]

Santa Cruz – Setup and action lower

What a beautiful Guitar.  Really nicely made, but with a rather high action. The neck set was about right, so nothing I can do there. The frets are nice and even so I can afford to bring the action down by quite a bit. Up at the 12th fret the action is much too high… […]

Freshman – Setup and lower action

This is another nice one.  I’m not a great fan of Freshman but this one feels right. Nothing much wrong, just a little high in the action.  The neck had just a little too much set in it for my liking. so flatten it out just a little.  I did that with the old strings […]

Classical Acoustic – New Nut and Saddle

This needs a little TLC if it’s going to play again.  The bridge saddle is badly damaged so I’m going to make a new one. The nut’s broken as well, so that’ll need to be replaced as well. First the nut.  From a bone blank. Next the saddle, using the old one as guide. One […]

Gretsch Country Gentleman – Neck binding

Finally got back to that old Gretsch.  Rather fragile, just handling it and bits of the binding are just falling off. The only way to be able to play it, is to strip it all off and replace it. I found some modern binding that just about matches the colour of the old stuff. It’s […]

Texas Custom Telecaster – Setup

What a lovely piece of wood, a really great looking guitar. It’s got a couple of problems, mostly just setup, but the neck isn’t on straight either.  Since the truss-rod adjustment is on the heel of the neck I’ll have to take it off anyway. I don’t need to measure that with a feeler gauge, […]

11 String Tanglewood – Bone Nut

An odd one this, one of the strings wouldn’t stay in it’s slot.  I thought the nut was broken but the slots were at a bit of an angle.  Easy answer, a new bone nut. A nice guitar though. While the strings are off, a good clean. and oil… I don’t have any 12 string […]

Hohner – Re-Wire and setup.

A bit of a battered Hohner, in need of a little TLC…… The owner wants some new pickups fitting for a start, these pickups’ll sound fantastic but I fear it’ll need a little more than that… I think it’s a bit of a waste to fit a great set of pickups like that but leave the […]