Carrying on with the Telecaster I’ve come upon a problem. Its caused by the fact that the neck is second-hand. It doesn’t sit entirely square so over the length of the strings the bridge will be out by about 3mm. That leaves 2 choices: A. Line up the pickup mount with the bridge which will require […]
Month: July 2013
Telecaster Build – 1st Update
Had a go at the Telecaster today. The first step of course is to fit the neck to the body. Not quite as easy as I would have liked as the neck pocket was just too small for the neck. However with a coupe of hours work and some very sharp chisels and it’s in. Since […]
Music Man Service and Setup
Simon of “A Thousand Sins” seems to be having a clear out and asked me to check out and service one or two of his guitars… First on the list, the Music Man. Fundamentally nothing at all wrong with it. The action at the nut was fine but the neck perhaps had a little too […]
Les Paul Upgrade – Copleted
Finished the Les Paul this morning. Not much left to do really, just fit the strings and re-tune. Once it was all back together I gave it a quick check-out and adjusted the pickup height. Although they aren’t Gibson pickups I went for Gibson setting which proved to be fine. Job done..
Telecaster Build
I’ve been asked to put together a Telecaster for a customer. He has most of the parts but wants it put together professionally. Most of the parts are new, apart from the neck, it’s from an old favourite guitar so he wants to incorporate it into the new guitar. Its seen some action so the first stage […]
Les Paul Upgrade
Got what might seem to be a strange request. To upgrade a modern Les Paul with old style electrics. The modern Les Pauls have all their electrics built in a modular fashion, which I guess make assembly much quicker and easy. What this guy wanted was very specific, I like it when the customer knows exactly what […]
Gretsch Fret Dress
Had a quiet week or so but back to work with a rather nice Gretsch Nothing much really wrong with it apart from a bit of buzzing around the 14th fret. Looking closely there were a few slightly high and some worn frets so a fret- dress should sort that out, (the black marks are […]
Gibson Flying V -5th Update
Got the wiring finished so all the bits and pieces back in place. Just one part missing, needed re-chroming which I really can’t do! Once that comes back all it’ll need is a new set of strings. To see the start of the project click here.